Omni Bar Plus


Wireless HD Soundbar

£799.99799.99 per system
Product Actions
Add to cart options

In stock. Estimated delivery time 2-4 business days

Omni App
Enjoy your favorite movie and music with wireless, room-filling sound.

The Harman Kardon Omni Bar+ needs just one cable to connect to your HD TV and lets you easily set up a wireless HD music system in your home. It also adds access to music streaming services such as Spotify Connect and Chromecast built-in. With Dolby Digital and the included Sub Woofer you can have new home theater and because it can connect to any Harman Kardon Omni+ speakers, you can easily set up a whole home wireless music system.


General Specifications

Soundbar amplifier power 30W x 4
Power consumption in sleep mode <3 Watts
Note The OMNI BAR+ is intended to be used for streaming music via Bluetooth and Wi-Fi technology. This product is designed to be instantly on and ready to play music at a moment's notice, therefore, the Bluetooth and Wi-Fi must remain active at all times to ensure proper operation. The OMNI BAR+ is in compliance with the European Union energy legislation. It will enter into sleep mode (networked standby) after 10 minutes without operation, after which it can be re-activated via Bluetooth or Wi-Fi.

Audio Specifications

Soundbar 4 x 60mm (2.25”) woofers, 2 x 20mm (0.75”) tweeters
Subwoofer 1 x 166mm (6.5”)

Control and Connection Specifications

One HDMi® output with Audio Return Channel (ARC) and CEC support Yes
Bluetooth® connectivity Yes
Google Cast for audio Yes
Spotify Connect Yes
One stereo analog-audio input Yes
One optical digital input Yes
WIFI connectivity with DLNA 1.5 support Yes
One USB port for software update only Yes
Remote control that conveniently allows you to control all Omni Bar functionality Yes
  • OMNI BAR+ with wireless subwoofer
  • Remote control with battery
  • Power Supply
  • Regional power cord(s)
  • HDMI cable
  • Optical cable
  • Analog cable
  • Quick-start guide
  • Table Stand Bracket
  • Wall mount bracket
{"searchRecords":[{"attributes":{"type":"FAQ__kav","url":"/services/data/v43.0/sobjects/FAQ__kav/ka01Y00000041x0QAA"},"Title":"My OMNI 50+ does not react when I am trying to pair it via Bluetooth?","Id":"ka01Y00000041x0QAA","ArticleNumber":"000007374","ArticleType":"FAQ__kav","Question__c":"My OMNI 50+ does not react when I am trying to pair it via Bluetooth?","Answer__c":"One explanation can be that your OMNI 50+ is part of a 5.1 system with your Omni Bar, which will make the surround OMNI 50+ left and right rear speakers act as \"slaves\", and Bluetooth connection is not possible to slave speakers.\r\nTo use the OMNI 50+ as portable speaker again, simply perform a reset of the speaker by pressing the reset button for 5 seconds. \r\nPlease note that after resetting your OMNI 50+, it is no longer part of the 5.1 wireless system."},{"attributes":{"type":"FAQ__kav","url":"/services/data/v43.0/sobjects/FAQ__kav/ka01Y000000YiJUQA0"},"Title":"Re-broadcasting TV or Movie signals from the OMNI BAR+ and ADAPT+","Id":"ka01Y000000YiJUQA0","ArticleNumber":"000007367","ArticleType":"FAQ__kav","Question__c":"Re-broadcasting any TV or Movie signal from your OMNI BAR+ or ADAPT+","Answer__c":"No, that is not possible. \r\nHowever, you can create a 5.1 wireless surround system to extend your TV or movie sound.\r\nAll you need is two additional OMNI+ speakers, such as 2 x OMNI 10+, OMNI 20+ or OMNI 50+."},{"attributes":{"type":"FAQ__kav","url":"/services/data/v43.0/sobjects/FAQ__kav/ka01Y000000YiJPQA0"},"Title":"Will I experience delay when watching movies with my OMNI BAR+ 5.1 or ADAPT+ Wireless system?","Id":"ka01Y000000YiJPQA0","ArticleNumber":"000007364","ArticleType":"FAQ__kav","Question__c":"Will there be any delay when watching movies with my OMNI BAR+ or ADAPT+ system?","Answer__c":"If you have selected the correct mode in the HK Control app when setting up your system, you will have very little delay.\r\nYou can always change the settings later, of course.\r\nSome TV sets permit adjustment of lip sync, in case you wish to optimize your system."}]}
Omni Bar Plus is rated 2.2 out of 5 by 5.
Rated 5 out of 5 by from High quality The quality is high and easily synced. The only problem is that the setup videos are not available at the moment in the HK website!!
Date published: 2018-11-20
Rated 2 out of 5 by from OMNI BAR PLUS W/ 10+ I have purchase the Omni bar with Omni 10+ speakers.($1600+) its pretty easy to pair all devices and connect to a 5.1 including all to WIFI. I have a huge problem. The bar sound "perfectly" fine with out 10+. once I connect and pair them both onmi 10+ few things happen while watching TV, voice goes out for a few seconds, and or a lot static goes on.
Date published: 2018-07-27
Rated 2 out of 5 by from Cut out The sound is great but cuts out ever hour It’s difficult to pair sound bar with LH/RH speakers. I am a big fan of HK, I have a few things from HK
Date published: 2018-05-24
Rated 1 out of 5 by from RETURNED!!! Better save the box. It sounds great, and it should. It is expensive and will take you more than an hour to get it set up. It is NOT any kind of plug an play. You have to download the app and search for it with your phone, when that fails use the router setup button. But the sound par has to be right next to the router to get that to work. Once you get it connected it sounds good. It does not have any sort of display, so you just push buttons on a light weight cheap feeling remote and see what happens. I am really glad mine failed completely within 2 weeks and within the return period.
Date published: 2019-02-26
Rated 1 out of 5 by from Wii-fi set up is nerve-breaking I bought the Omni Plus and two Omni 10 but in spite of all efforts did not get them to connect all together to wii-fi. The app is extremely poor and sends error messages inconsistently. After hours of trying out and a lot of disappointment- I packed it again and will return to the shop tomorrow morning. Product has not passed usability engeniting and is impossible to work with.
Date published: 2018-11-29
  • y_2019, m_3, d_19, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.11
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_GB, sid_omnibarplus, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harmankardon

So i just bought a Omni Bar + and i have a very noticable sound delay, no matter if i use hdmi, optical or aux too connect it. please help me fix this.

Asked by: RoboDuck
I just bought it too. Same delays. But I am not going to waste a hour on the phone . It is just going back.
Answered by: Gene825
Date published: 2019-03-13

Is it possible to set up and control this system with Amazon Alexa/HK Allure smart speaker?

Asked by: FredrikE
Hi FredrikE. The OMNI Bar is an independent system, and cannot work with Alexa or our Allure. So this is not possible, unfortunately.
Answered by: Bo HARMAN
Date published: 2019-01-28

1. When connecting the Omni bar with an OMNI10+ for full surround experience, how do the OMNI+ receives the audio signal? 2. With the above configuration. How do you configure the rear, back, left, right channel? Thanks and Regards

Asked by: Alvaro
Hi there, thanks for your interest. You can do so using the HK Controller App and by doing the steps below: 1 - Go to Settings &gt; Room management 2 - Select the room you wish to add additional speakers in. 3 - Select Set up multi-channel and you will be guided on how to add two OMNI+ speakers connected on the same network as surround or rear speakers. 4 - There's a page where you can drag the speakers to act as the left or right surround speaker and you would hear a confirmation sound from the selected speaker if its successful. If you have questions or concerns, please submit a case request at https://www.harmankardon.com/support-contact.html and the Customer Service Team will be more than happy to assist you.
Answered by: Rhae
Date published: 2018-12-31

I've read in Wireless 5.1 Surround Setup from the Omni Bar+ manual, you need to connect all the speakers (OMNI10+) to a 5GHz Wifi Network. How does it manages the audio distribution when you want a 5.1 surround experience with the HDTV (HDMI) as source

Asked by: Alvaro
Hi there, thanks for your interest. You can do so using the HK Controller App and by doing the steps below: 1 - Go to Settings &gt; Room management 2 - Select the room you wish to add additional speakers in. S 3 - Select Set up multi-channel and you will be guided on how to add the OMNI+ speakers connected on the same network as above, with the ability to assign any other speaker already on the network to this room. 4 - Once its done, continue to Source Set-up. 5 - The final step to set up your Omni Bar+ or Omni Adapt+ is to configure the external sources. For each source, HDMI TV, Optical, or AUX-in, you will select how you plan to use this source 6 - If you are not using this source, select &ldquo;Not used.&rdquo; 7 - If you select &ldquo;Watching movies and TV shows,&rdquo; then this input will have very little delay and good lip sync with the TV for video applications. But you won&rsquo;t be able to restream this input source to other Omni speakers in your house. 8 - If you select &ldquo;Listening to music,&rdquo; then you will be able to restream this input to other Omni speakers in your house. Bus an additional delay will be added for stability, which will be unsuitable for video applications. 9 - You can change these settings later by going to Settings &gt; Manage Rooms. Find the room you wish to change, select it, and then select Source setup. You will be taken through this step again and have the chance to reconfigure the inputs. 10 - After this step, room setup is complete. You may now set up additional rooms through the same process, or start streaming music. If you have questions or concerns, please submit a case request at https://www.harmankardon.com/support-contact.html and the Customer Service Team will be more than happy to assist you.
Answered by: Rhae
Date published: 2018-12-31

can I set up the omni bar with subwoofer without remote controller? Also, can I control the system through mobile app without remote controller?

Asked by: VarunHK
You can set up the omni bar and the subwoofer even without the physical remote control as you can use the top panel of the Soundbar. You can also control the Omni bar+ using the HK Controller, but only when playing songs through the internet and not when playing it through wired connection.
Answered by: Mario at Customer Service
Date published: 2018-12-04

Hi&nbsp; can the woofer for the omnibus plus be placed flat on the floor?

Asked by: rich201
Hello! Although the feet of the subwoofer can be unscrewed, we do not recommend placing it flat on the floor because the bass quality would be affected. The sound would go directly up the ceiling rather than front firing.
Answered by: Nick F
Date published: 2019-02-10

Hi I have two hk omni 20 and an a omni 10 not the plus model would these connect to any of your tv sound bars as I would like to be able to use it with the other speakers Thanks Andy&nbsp;

Asked by: Charlton1369
Hi, No, you would need Omni+ series speakers to combine with the Omni Bar+ to work as a full surround set. You can't combine the 1 generation Omni speakers in combination with any other soundbar.
Answered by: Kay Harman
Date published: 2018-07-10

i have omni plus soundbar and 2 omni 20 plus speakers, i have not been able to get them 5.1 configured. one omni 20 plus has a lower firmware version and will not update.. i suspect this to be the problem. any way to force an update on the box?

Asked by: dutchrobert
Hi, Thank you for your question. Yes, all speakers need to have the same firmware or else the 5.1 system will not work at all. Contact our support via customer.support@harman.com with a picture of the current firmware version (found in the HK Controller app) and the MAC address of the specific device. Go to settings - Product info - Product Software information and provide our customer service with the details.
Answered by: Danny HARMAN
Date published: 2018-06-08
  • y_2019, m_3, d_19, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.11
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_14
  • loc_en_GB, sid_omnibarplus, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harmankardon